Warning

Careless or improper hand loading procedures can cause serious personal injury.  Always wear eye protection.  Handloading should only be done by someone with a thorough knowledge of reloading procedures and safety practices.  Since individual handloading procedures and safety practies are beyond our control,  Outlaw State Bullets LLC disclaims all liability for any damages which may result from the reloading or use of ammunition reloaded with our components.

Discharging firearms in poorly ventilated areas,  cleaning firearms or handling ammunition may result in exposure to lead and other substances know to the state of California to cause birth defects,  reproductive harm and other serious physical injury.  Have adequate ventilation at all times.  Wash hands thouroughly after exposure.

Testing

Test the bullets for stability before using a supressor.  A target at 25 yards is a good starting point.  Shoot over a crony to make sure your load is subsonic.  Check bullet hole in target for stability.  Velocity should be around 1040fps.  Most users find the best accuracy by starting on the lands (this means to load the dual diameter step of the bullet against the rifling in the chamber throat)  then back out 0.010 at a time to find accuracy.